Heated Beds
3D printing and compact process platforms.
04 · FEATURED PLATFORM · LOW MASS · FLAT SURFACE HEATING
High-Temperature Mica Heating Plate
A thin, fast-response plate heater that combines mica insulation with a distributed flat-wire circuit for appliances, heated beds and compact planar assemblies.
InsulationMuscovite Mica
ElementNiCr Flat Wire
TemperatureUp to 400°C
Thickness0.6–1.2 mm
LOW MASS · FLAT SURFACE HEATING
DRAG TO INSPECT
Customization preview
Shape the request
around your equipment.
Adjust the visual geometry and record the electrical, connection and application requirements. Every combination remains subject to engineering review.
Construction
Purpose-built from
the inside out.
A shaped resistance circuit is captured between dielectric mica layers and finished with a protective outer wrap. Low thermal mass produces rapid response while the flat format keeps the assembly compact.
CONCEPT VIEW
The drawing communicates functional layers. Final construction follows the approved product drawing.
The drawing communicates functional layers. Final construction follows the approved product drawing.
01Protective Outer Wrap
02Mica Insulation Layer
03Flat Wire Heating Circuit
04Mica Base Insulation
Applications
Where this product
does its best work.
The final configuration is matched to the mounting conditions, thermal load and control system in the finished equipment.
Small Appliances
Griddles, warmers and household equipment.
Surface Heating
Panels, plates and light industrial fixtures.
Engineering reference
A flexible starting
specification.
Values shown are typical design ranges. Production specifications are confirmed against the approved drawing and application conditions.
01
Custom Outline
Rectangular, circular and shaped designs.
02
Hole Patterns
Mounting holes and clearance zones to drawing.
03
Distributed Circuit
Circuit layout tuned for surface uniformity.
04
Sensor Ready
Surface thermistor and thermocouple integration.
| Thickness | 0.6–1.2 mm typical |
|---|---|
| Rated Voltage | 12–380 V custom |
| Insulation | Muscovite mica |
| Element | Nichrome flat wire |
| Temperature Range | Up to 400°C |
| Mounting | Clamp / bond |
APPLICATION NOTE
Full and even contact with the heated surface is essential. Air gaps may create hot spots and damage the insulation layers.
Full and even contact with the heated surface is essential. Air gaps may create hot spots and damage the insulation layers.
Custom configuration
Make it fit the
application exactly.
Continue with a reusable project brief for engineering review.