Mold Heating
Injection molds, dies and tooling cavities.
01 · FEATURED PLATFORM · HIGH WATT DENSITY · PRECISION FIT
Single-Ended Cartridge Heater
A compact, high watt-density heating element engineered for confined mold, die and machine cavities. Every unit is built around your bore, voltage and thermal load.
SheathSUS304 / 310S
Lead WirePTFE / UL3122
Temperature260–600°C
BuildNon-standard
HIGH WATT DENSITY · PRECISION FIT
DRAG TO INSPECT
Customization preview
Shape the request
around your equipment.
Adjust the visual geometry and record the electrical, connection and application requirements. Every combination remains subject to engineering review.
Construction
Purpose-built from
the inside out.
High-grade resistance wire is centered inside a stainless steel sheath and surrounded by compacted magnesium oxide. The construction transfers heat efficiently while maintaining electrical insulation under demanding operating conditions.
CONCEPT VIEW
The drawing communicates functional layers. Final construction follows the approved product drawing.
The drawing communicates functional layers. Final construction follows the approved product drawing.
01Stainless Steel Sheath
02Compacted MgO Insulation
03NiCr Resistance Coil
04Sealed Lead Exit
Applications
Where this product
does its best work.
The final configuration is matched to the mounting conditions, thermal load and control system in the finished equipment.
Packaging
Seal bars, hot stamps and cutting tools.
Machine Systems
Hot plates, rollers and compact process equipment.
Engineering reference
A flexible starting
specification.
Values shown are typical design ranges. Production specifications are confirmed against the approved drawing and application conditions.
01
Precision Diameter
Ground sheath options support close bore fit and efficient heat transfer.
02
Integrated Sensing
Thermocouple configurations can be engineered into the assembly.
03
Lead Configurations
Straight, right-angle and protected lead exits are available.
04
Custom Wattage
Power distribution is matched to the application and operating profile.
| Diameter | Ø6–16 mm typical |
|---|---|
| Rated Voltage | 12–480 V custom |
| Sheath Material | SUS304 / SUS310S |
| Lead Options | PTFE / UL3122 / glass braid |
| Temperature Range | 260–600°C |
| Configuration | Drawing-to-sample |
APPLICATION NOTE
Final ratings depend on fit, watt density, sensing method and heat transfer conditions. Confirm the complete operating profile before production.
Final ratings depend on fit, watt density, sensing method and heat transfer conditions. Confirm the complete operating profile before production.
Custom configuration
Make it fit the
application exactly.
Continue with a reusable project brief for engineering review.